Staad.Pro V8i-Advanced

Staad.Pro V8i-Advanced

Staad.Pro V8i-Advanced

94 votes, average: 4.26 out of 594 votes, average: 4.26 out of 594 votes, average: 4.26 out of 594 votes, average: 4.26 out of 594 votes, average: 4.26 out of 5 (94 votes, average: 4.26 out of 5)
You need to be a registered member to rate this post.
Loading...

STAAD.Pro is the structural engineering professional’s choice for steel, concrete, timber, aluminum, and cold-formed steel design of virtually any structure including culverts, petrochemical plants, tunnels, bridges, piles, and much more through its flexible modeling environment, advanced features, and fluent data collaboration. STAAD.Pro allows structural engineers to analyze and design virtually any type of structure through its flexible modeling environment, advanced features and fluent data collaboration.

  • Flexible modeling is provided by a state-of-the-art graphical environment and the design supports over 70 international codes and over 20 U.S. codes in 7 languages.
  • An array of advanced structural analysis and design features are included such as nuclear certification for 10CFR Part 50, 10CFR 21, ASME NQA-1-2000, time history and push over analysis and cable (linear and non-linear) analysis.

Staad.Pro V8i(advanced)- Video Training

Chapter-1 -Introduction

  • About STAAD.Pro and Applications
  • Application in Industry vs University comparison
  • Traditional Structural Analysis vs. MODERN approach
  • By HAND Vs. By computer
  • Finite Element Method-Introduction
  • FEM Solutions
  • STAAD Module Orientation
  • Analysis capability and International Code support
  • 3rd part integration support
  • GUI Quick overview
  • Model Generation Techniques
  • Command File editor info
  • Built-in info order
  • Finite Element modeling
  • Load types and Generation
  • Model Verifications
  • Adv. Analysis capability
  • Result verification and post processing
  • Design code-RCC and Steel
  • Report customization

 

Chapter-2 -Solving Method

  • Solving Approach
  • How to start STAAD.Pro V8i
  • Navigating STAAD.Pro V8i GUI
  • Configuration & Settings
  • Unit and Code configuration
  • Back Up Manager
  • Opening and Saving Projects
  • Archiving Projects
  • Overview of Structure
  • Status Bar detailsHierarchy Managing
  • Understand the different component of GUI
  • VIEW Controls
  • Exercises & Projects.

 

Chapter-3 -Geometry Operations

  • Renumbering
  • Importing CAD Files
  • Details About Grid systems in STAAD.
  • Types of Structure and Methods
  • Types of Element
  • Mode of Structure
  • Creating Geometry for Structure
  • How to create Beam /Column & Curved Beams
  • Structure Wizard
  • Structure Wizard Model and STAAD Transfer
  • Modifying Geometry for Structure Copy /Copy-Link/Rotate/Mirror etc)
  • Add Mid points
  • Add Perpendicular intersection beam
  • Cut Section
  • Stretch /Split BEAMS
  • Hot spots
  • Fill Plates
  • Different Viewing Controls for Structure Geometry
  • Exercises & Projects.

 

Chapter-4-Boundary Conditions & Properties

  • Properties of beam/column
  • Display properties
  • Rendering
  • Steel profiles
  • Material + CROSS SECTION
  • Beam and column end offset + adv. options
  • Beta control
  • Use cursor to assign and selection
  • View assign
  • Types of support
  • Material Assignment
  • Material creation
  • Exercises & Projects.

 

Chapter-5 -Load Types

  • Load case
  • Defining Load case
  • Dead Load defining
  • Imposed Load defining (LIVE)
  • Point Load
  • UDL Load
  • Floor Load
  • Area Load
  • Wind Load –IS Code based
  • Seismic Load-IS Code based
  • Load combinations
  • Auto LOAD Combinations
  • Envelopes
  • Projects
  • Projects on Buckling
  • Exercises & Projects.

 

Chapter-6-Post-Processing

  • Analysis Outline
  • Analysis/Print
  • Beam2D
  • Post Processing
  • Local Coordinate System
  • Internal Hinge
  • Truss2D
  • User Customized
  • Inclined Support & Support Settlement
  • P-Delta Analysis
  • Bracing with Truss or Tension Members
  • Building with Flat Slab & Shear
  • Transfer Force for Connection Design
  • Exercises & Projects.

 

Chapter-7 -RCC Design & Analysis

  • RCC Design and Analysis
  • Loads and Repeat Load case for RCC
  • IS RCC Codes and STAAD.Pro
  • Exercises & Projects.

 

Chapter-8-Slab Design & Analysis

  • Slab Design and Analysis
  • IS CODE Check
  • Approach
  • Exercises & Projects.

 

Chapter-9 -Modal Analysis

  • What is Modal Frequency or fundamental Frequency
  • Necessary for conducting Modal Analysis
  • Parameters need to check after Analysis
  • Exercises & Projects.

- See more at: http://store.smartlearningindia.com/civil-engineering-structural-design-using-staad-pro-software-training-id-191822.html#sthash.EsyPVYCT.dpuf

Course Intro Video

Lessons

  1. About STAAD.Pro and Applications Application in Industry vs University comparison Traditional Structural Analysis vs. MODERN approach By HAND Vs. By computer Finite Element Method-Introduction FEM Solutions STAAD Module Orientation
  2. Solving Approach / How to start STAAD.Pro V8i/ Navigating STAAD.Pro V8i GUI/ Configuration & Settings/ Unit and Code configuration/ Back Up Manager/ Opening and Saving Projects
  3. Chapter-3 -Geometry Operations

    Renumbering/ Importing CAD Files/ Details About Grid systems in STAAD./ Types of Structure and Methods/ Types of Element/ Mode of Structure/ Creating Geometry for Structure/ How to create Beam /Column & Curved Beams/ Structure Wizard
  4. Chapter-4-Boundary Conditions & Properties

    Properties of beam/column/ Display properties/ Rendering/ Steel profiles/ Material + CROSS SECTION/ Beam and column end offset + adv. options/ Beta control
  5. Curabitur est magna, tincidunt in lacus id, feugiat sodales urna. Praesent id risus ac felis aliquam dictum ac ac nunc. Mauris in orci dapibus, gravida metus vitae, mattis mauris. Sed pulvinar auctor elementum. In hac habitasse platea dictumst. Sed et feugiat lacus.
  6. Chapter-8-Slab Design & Analysis

    Slab Design and Analysis/ IS CODE Check/ Approach

Staffs

Support
support